Rainwater barrel 200l PH + lid

Plastic garden barrels for rainwater with a volume of 200 liters with a drain tap are made of PP material. The indisputable advantage of the barrels is their strength and also the green color, thanks to which they blend in with the surroundings. Plastic barrels are supplied with a top lid and an unmounted drain tap. To install the tap, it is necessary to drill a hole of 26 mm (with a drill of the specified diameter or smaller, drill several holes in the place of the outlet hole and create the desired hole of 26 mm diameter by profiling them). Garden barrels with a volume of 200L are equipped with a mounting surface for a drain tap in the lower part in three places (the 500L has only one). It is therefore possible to fill several containers at the same time by purchasing an additional drain tap. As an accessory, you can buy a practical stand for the barrel, which makes it easier to fill buckets or watering cans. During the winter months, plastic barrels must be stored in areas where the temperature does not drop below freezing.

When receiving the shipment from the carrier, it is necessary to check the barrel for damage (crack). Any later complaints of this type will not be taken into account. In case of damage to the barrel during transport, it is necessary to draw up a complaint protocol with the transporter and demand full compensation for the damage. In case of non-recognition of the claim by the carrier, you can resolve the whole matter with us. In order for the claim to be recognized, it is necessary to have a statement from the carrier. The carrier has determined for us as the sender under what conditions / method of packaging / the claim will be accepted and we always comply with this.